Borescopes for Endoscope Reprocessing

Visual Inspection Borescopes for Endoscope Reprocessing and medical devices:

These small diameter (less than 3mm) borescopes or inspection cameras can be used to inspect endoscope's internal working channels during reprocessing and other medical devices with small and narrow lumen channels . It is imperative to do visual inspection during endoscope reprocessing to make sure high quality cleanness and safety. The external of endoscopes can be inspected with optical magnifiers or video magnifiers/microscopes. The internal of endoscopes needs a small diameter borescope inspection camera for careful examination. 

Common problems of the internal channels during endoscope (gastroscopes, colonoscopes, duodenoscopes, and  echoendoscopes) reprocessing 

• corrosion
• crack and scratches
• physical damages
• debris
• discoloration
• moisture
• foreign objects like fiber, lint, brush bristles and particles

MedInScope, Med-In-Scope, Medical Inspection Borescope

Borescopes desgined for medical devices lumen inspections 

Normal procedure steps of endoscope reprocessing:
  1.  Pre-cleaning
  2. Leak test
  3. Manual cleaning
  4. Visual inspection 
            Outside exam with magnifier or microscope
            Internal channel inspection with borescope
  5. High level disinfection or sterilization
  6. Dry and storage

Small diameter borescopes & fiberscopes:

ET-078 fiberscope 0.78mm 60cm long
VK-0-1210 videoscope 1.2mm 1m long
SV-0-1610 videoscope 1.6mm 1m long
SV-0-1810 videoscope 1.8mm 1m long
VK-2-1815 videoscope 2-way 1.8mm 1.5m long
NP-2011 and NP-2020, 2mm, 1.1m and 2m long
SV-2010S videoscope, side-view, 2mm, 1m long